ECO-RF range

ECO-REP

Extends the range of the ECONTROL

This signal repeater is placed between the ECONTROL centralised station and the ECO-REG (Control), or between an ECO-CHES and the ECO-IOT (Data acquisition). With no data cable, it repeats in real time the radio messages sent to it.

Book a call Features
ECO-REP repeater, AIDHOM enclosure with internal antenna
220 Vpower supply Two-way communication

Real time

Transparent, two-way wireless repetition.

220 V

Power supply, with internal or remote antenna.

over 500 m

Range with up to 4 ECO-REP in series, on the ECO-CHES radio network.

Radio range

Extends the range of the ECONTROL centralised station.

Depending on where the ECO-REG is in the room, wireless communication may be disrupted. A repeater is then needed between the ECONTROL and the most distant ECO-REG: a single ECO-REP between the station and an ECO-REG.

ECONTROL The centralised station
ECO-REP Repeats messages in real time
ECO-REG 1 ECO-REG 2 ECO-REG 3 The most distant ECO-REG
Signal disrupted near: Metal cabinets Fridge TV …

One repeater for several ECO-REG

A single ECO-REP relays several controllers located far from the station.

Several repeaters per ECONTROL

A single ECONTROL centralised station can rely on several ECO-REP.

A single repeater between the station and the ECO-REG

On the ECONTROL side, ECO-REP are not placed in series. Repeaters in series are reserved for the ECO-CHES radio network.

With the ECO-CHES

Up to 4 ECO-REP in series.

The ECO-RF2 card in the ECO-CHES communicates by radio with the ECO-IO devices. ECO-REP placed in series extend this radio network to over 500 m.

ECO-CHES ECO-RF2 card
ECO-REP 1
ECO-REP 2
ECO-REP 3
ECO-REP 4
ECO-IO devices ECO-IOT
over 500 m

Devices compatible with the ECO-RF2 card: ECO-IOT, ECO-REL-CANRF, ECO-ANA-CANRF.

Discover the ECO-RF2 card

Two versions

Internal or remote antenna.

The same enclosure, powered at 220 V, comes with two types of antenna.

ECO-REP with internal antenna

Internal antenna

The antenna is built into the enclosure.

ECO-REP with remote antenna, black external antenna

Remote antenna

The same enclosure, with an external antenna.

Product sheet

ECO-REP features

  • Real-time repetition, in less than 10 ms
  • Transparent, two-way communication
  • Configured by radio from the ECONTROL, without removal
  • Internal antenna (± 30 m) or remote antenna (± 100 m)
  • 220 V power supply

Dimensions

91 × 97 × 27 mm

Width × height × thickness · 420 g

Antenna

Internal · ± 30 mRemote · ± 100 m
Role
Wireless signal repeater
Location
Between the ECONTROL and the most distant ECO-REG, at a height of ± 2 m or in a suspended ceiling
With the ECONTROL
One repeater for several ECO-REG, several repeaters per ECONTROL, only one between the station and an ECO-REG
With the ECO-CHES
Up to 4 ECO-REP in series, over 500 m range
Repetition
Wireless, real-time (less than 10 ms), two-way, no synchronisation
Configuration
By radio, from the centralised station
Radio
ISM 868 – 870 MHz, 10 mW, same frequency as the ECO-REG
Range
± 30 m with the internal antenna, ± 100 m with the remote antenna
Remote antenna
868 MHz (850 – 885 MHz), quarter-wave, 50 Ω, VSWR ≤ 1.9, −30 to +85 °C
Power supply
220 V – 3 VA, 1 A fuse
Dimensions
91 × 97 × 27 mm
Weight
420 g
Enclosure
Halogen-free polycarbonate, IP50, fixed with 2 screws
Warranty
2 years hardware

Works with

ECONTROLThe centralised station ECO-REGThe wireless controller ECO-CHESThe boiler room station ECO-RF2Wireless control and measurement
Previous productECO-PROX

ECO-REG too far from the station?

Let’s talk about your building. The analysis of your energy consumption and the return-on-investment calculation are free.

Choose a date +32 (0)4 377 10 52